Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panels of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Door trim panel

This guide explains how to remove the door panels, whether front or rear, of the BMW 3 Series. First, open the door and start by removing the plastic cover around the handle; then, unscrew the fastening screws located inside the holes and on the sides of the panel, prying at the edges to disengage and remove it, as shown in the video. At this point, disconnect the handle cable and the electrical connector for the window switch to remove it completely; apply the reverse procedure for reassembly!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner from a BMW 3 Series E90, a very simple task. To do this, you will only need a flathead scr…
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner in a BMW 3 Series, a very simple and quick operation. First, open the trunk. Then, remove …
How to Remove the Rear Seat of the BMW 3 Series
How to Remove the Rear Seat of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Follow these instructions to disassemble and remove the rear seat of the BMW 3 Series. First, open the rear doors of the vehicle and pull the rear se…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos