Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Pollen Filter of the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Cabin air filter

Here are the steps on how to remove and replace the cabin air filter or pollen filter of the BMW 1 Series. First, open the bonnet of your car and start removing the screws securing the plastic cover found under the windscreen wipers; then remove the pollen filter cartridge, as shown in the video. At this point, install the new cabin air filter, inserting it in the correct direction; finally, refit the plastic cover, securing it properly with all its screws!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on a BMW 1 Series
How to Replace the Pollen Filter on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) How do you replace the cabin air filter (pollen filter) on a BMW 1 Series? This video shows you how to disassemble it. Remove the screws securing the…
How to Change Engine Oil and Filter on a BMW 1 Series
How to Change Engine Oil and Filter on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To change the engine oil and filter on a BMW 1 Series, open the car door and pull up the engine compartment release lever located at the bottom left …
How to replace the oil filter and engine oil of the BMW 1 Series
How to replace the oil filter and engine oil of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today we will independently replace the oil filter and engine oil of the BMW 1 Series model E87. To perform the oil replacement, we must pour the pre…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 1 2011-2019 - Where is the cabin filter of the BMW 1 Series F20? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos