Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the passenger seat belt in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Checks and maintenance

In this tutorial we can see how to remove the passenger seat belt in the BMW 3 Series, a very simple operation. First of all we move the seat completely forward, then we remove the back cover and unscrew the screw underneath with a Torx T50 wrench. Next, we slightly disengage the lower right plastic edge, so that we can completely remove the panel placed between the front and rear doors. At this point, we can unscrew the last fastening bolts of the belt, extract it and mount the spare following the reverse procedure.

Posted on 1 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the rear seat belt of the BMW 3 Series
Guide to replacing the rear seat belt of the BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below we will see the main instructions on how to disassemble and replace the rear seat belt of the BMW 3 Series. First, we open the rear doors of th…
How to remove the seat belt of a BMW 3 Series
How to remove the seat belt of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see in this video how to remove the seat belt with its reel on a BMW 3 Series. Get yourself various levers, screwdrivers and fixed or socket wr…
Remove the A-Pillar Trim on BMW 3 Series
Remove the A-Pillar Trim on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this video, see how to remove the front and rear trim and the seat belt retractor on a BMW 3 Series. Gather various trim tools, screwdrivers, and …

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos