Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Anti-Pinch Window Switch Light on a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

The anti-pinch window switch light on a BMW 3 Series activates whenever the system detects an obstacle preventing the window from closing. It often lights up due to dirt on the seals or a foreign object in the system. To reset this light, lower the problematic window all the way down. Once lowered, press and hold the button to raise it. This operation may take several seconds, but when the window is fully raised, the light will turn off.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Anti-Trap Function on the BMW 3 Series?
How to Reset the Anti-Trap Function on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the Anti-Trap function of the windows on the BMW 3 Series, turn on the ignition and fully lower the driver's side window while holding the b…
How to reset the window regulator motor of the BMW Series 3.
How to reset the window regulator motor of the BMW Series 3.
BMW Serie 3 (1998-2006 / E46) Today's instructions will show us how to reset the window regulator motor of the BMW Series 3. First, let's get inside the vehicle and start by turni…
Replace Window Regulator Motor on BMW 3 Series
Replace Window Regulator Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Is the window regulator not working on your BMW 3 Series? Remove the door panel cover to access the interior. Disconnect the battery terminals for sa…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos