Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery in the BMW 5 Series G30

Model: BMW Serie 5 G30 - Years 2017-2024
Part: Key

Replacing the button cell battery inside the key of your BMW 5 Series G30 is very simple and thanks to the indications in the following guide you will be able to complete the entire operation without the slightest difficulty. First locate the button on the side of the cover and remove the physical emergency key. Immediately afterwards, open the cover using the same key just removed and proceed with replacing the used battery with the new one. Finally, reassemble the cover correctly and personally test the effective functioning of the key.

Posted on 21 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery of the BMW 5 Series?
How to replace the remote control battery of the BMW 5 Series?
BMW Serie 5 (2017-2024 / G30) In this tutorial we can see how to replace the remote control battery of the BMW 5 Series G30. For this quick and easy operation we will need a 3V CR…
Replacing the rear brake pads on the BMW 5 Series G30
Replacing the rear brake pads on the BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) In this video tutorial we will see the steps that will allow us to remove and replace the rear brake pads and reset the brake warning light on the BM…
Service reset on a BMW 5 Series G30
Service reset on a BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) Today we will see how to reset the maintenance of a BMW 5 Series G30. Let's start the operation by turning on the vehicle's ignition by pressing the …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos