Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Trunk Lock

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Trunk lock

If you have trouble opening the trunk, it is likely that the lock needs to be replaced. This video will show you how to remove it. First, remove all the clips from the panel using the appropriate tool. Once the clips are removed, gently bend the panel to access the screws for the lock. After you have unscrewed the screws, before pulling out the lock, disconnect the electrical connector and the white plastic cable that connects to the key. The latter, as shown in the images, is attached to the lock assembly via a clip similar to those on the panels, into which a flat-tipped pin like a screwdriver is inserted. Car model: BMW E46 M3 Year: 2002
Required tools: panel removal tool or trim removal pliers, Torx 30 wrench.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the locked trunk of the BMW 3 Series
How to open the locked trunk of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The trunk of the BMW 3 Series is locked from the inside, nothing works on the f30 and f31 models. It is possible to open the rear hood in an emergenc…
Removing the Front Door Handle
Removing the Front Door Handle
BMW Serie 3 (1998-2006 / E46) If you need to remove the front door handle, it is not necessary to take off the door panel: simply move the rubber of the weatherstrip to access the…
How to Replace the Trunk Lock on a BMW 3 Series?
How to Replace the Trunk Lock on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial, you will see how to replace the trunk lock on a BMW 3 Series, a very simple and quick operation. First, ensure the vehicle is off, …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos