Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a BMW X1 F48

Model: BMW X1 F48 - Years 2015-2022
Part: Battery

In this video, see how to remove and replace the battery in a BMW X1 F48, second generation, by following these simple and quick steps. First, open the hood and locate the battery on the right side; then remove the air filter box to access the battery, as shown in the video. At this point, disconnect the battery terminals using a 10 mm wrench to loosen the nuts, and remove the screws found at the base of the battery. Now, lift and replace the battery with a new one that has the same amperage.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X1 (2015-2022 / F48) This guide shows you how to disassemble and replace the battery in the electronic key remote for the BMW X1 F48, second generation. Take your remote …
BMW X1 (2015-2022 / F48) To replace the small button battery inside the key of your BMX X1 f48 independently, simply follow all the steps described in our new guide. First of…
BMW X1 (2015-2022 / F48) Let's see how to replace the battery of the BMW X1 version F48: we will have to remove from the engine compartment, the air filter cap and then the f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos