Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Door Panel

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

The rear trim panel covers the inner side and is very simple to remove: it consists of a central element that covers the speakers and an outer frame; start by removing the two screws located under the internal armrest handle and then, using a plastic pry tool, detach the clips that secure the central panel to the outer frame, which in turn consists of an upper strip, under the glass, and a lower semi-panel also secured with clips.

At this point, detach the clips and complete the removal.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the BMW 3 Series
Removing the Door Panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's instructions will show you the procedure for removing and replacing the front door panel of the BMW 3 Series. First, get inside the vehicle a…
Removing the Rear Door of the BMW 3 Series
Removing the Rear Door of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) This guide will show you the procedure for removing and replacing the rear door of the BMW 3 Series. First, open the rear door of the vehicle and sta…
How to Remove the Rear Panel of a BMW 3 Series
How to Remove the Rear Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the rear door panel (left side) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upp…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos