Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Warning light – error code

In this video, see how to reset the service in the BMW 1 Series F20. This operation should only be performed after completing the required maintenance as specified. Turn on the instrument cluster, navigate to the indicated screen using the button located just below the speedometer, and hold it down for about 5 seconds until you enter the maintenance menu. Once inside, scroll through the various services, find the one to reset, and perform the reset by holding down the same button. Finally, turn off and on the ignition again to verify that the procedure was successful.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a BMW 1 Series
How to Reset the "Service" Light on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you can start, ensure that the service has been carried out, then sit in the driver's seat of your BMW 1 Series. Begin by pressing the appropr…
How to Reset the Service on the BMW 1 Series?
How to Reset the Service on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this tutorial, you will see how to reset the service on the BMW 1 Series, a very simple and quick operation to perform only after completing all m…
How to Reset the Service Light on a BMW 1 Series?
How to Reset the Service Light on a BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this tutorial, you will see how to reset the service light on a BMW 1 Series, a very simple and quick operation to perform only after completing a…

    Frequently Asked Questions

    • Serie 1 2011-2019 - What does the BMW 1 Series airbag warning light mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos