Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on BMW E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the fuel filter on a BMW E46 by following a few simple steps: the first thing to do is purchase a new fuel filter from an authorized dealer; the next step is to lift the hood and secure it with the prop rod, placing a cloth to prevent damage to the bodywork.

Using a 7mm socket wrench, loosen the clamp on the hose connected to the fuel filter and disconnect the connector from the filter.

With a T30 Torx wrench, remove the fastening element located above the filter. Use a flathead screwdriver to pry off the hoses connected to the filter.

With the T30 Torx wrench, loosen the filter support and remove the filter from its housing. Replace the old filter with the new one and reconnect all parts in reverse order.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Fuel Filter Replacement BMW E46
Fuel Filter Replacement BMW E46
BMW Serie 3 (1998-2006 / E46) Let's see how to remove the fuel filter on a BMW 3 Series. Raise the car to access the fuel filter located under the vehicle's floor. Remove the reta…
How to Reset the Oil Light on the BMW 3 Series E46
How to Reset the Oil Light on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) If the oil light appears on the instrument cluster of your BMW 3 Series E46 (model years 1998-2006) despite having already changed the oil and the co…
How to Reset the Oil Light on the BMW 3 Series E46
How to Reset the Oil Light on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this mini guide for your BMW 3 Series E46, you will learn how to manually reset the engine oil light. First, enter the cabin and ensure your BMW E…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos