Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the BMW 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Service warning light

In this mini guide for your BMW 3 Series E46, you will learn how to manually reset the engine oil light. First, enter the cabin and ensure your BMW E46 is completely off. Next, locate the button between the fuel gauge and the speedometer and hold it down. At the same time, insert the key and turn on the ignition. When the word "Reset" appears on the display, release the button and press it again until the display starts to flash. Finally, press the same button one last time to complete the process.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the BMW 3 Series E46
How to Reset the Oil Light on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) If the oil light appears on the instrument cluster of your BMW 3 Series E46 (model years 1998-2006) despite having already changed the oil and the co…
Reset Oil Light BMW 3 Series E46
Reset Oil Light BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In today's tutorial, you will learn how to reset the oil light on a BMW 3 Series E46. First, get inside the vehicle and turn the ignition key to the …
How to Reset the Service Light on the BMW 3 Series E46
How to Reset the Service Light on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) After performing the service or oil change on your BMW 3 Series E46, you need to manually reset the maintenance light. Here are the steps you need to…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos