Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
MK 2, F21, F20
- Years 2011-2019 In this video tutorial you can see how to perform the reset on BMW 1 series, following a few simple steps that will guide you step by step to the correct management of your vehicle, without necessarily resorting to the assistance of professional mechanics. First of all it is necessary to perform maintenance such as oil change; then get on board the vehicle, press the button and turn on the panel and wait for the message with the Km to appear. Press and hold the partial Km button located under the speedometer. As soon as the message engine oil reset appears, you must release and then press the button again; wait for the message carry out the reset and release the button and then press it again until you have completed the reset.
Posted on 19 September 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |