Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
F40, MK 3
- Years 2019-2024 We can see thanks to this very short video tutorial how to reset the service light on a third generation BMW 1 Series. First, we turn on the vehicle's instrument panel without starting the engine and make sure that all doors and windows are closed. Then, we quickly press the "start" button three times to enter the diagnostic mode. After that, we wait for five seconds and then press and hold the "BC" button on the turn signal lever for about twenty seconds. Finally, when prompted to perform the reset, we press the "BC" button again to confirm.
Posted on 23 August 2023 by ScegliAuto
This video is currently unavailable
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |