Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a BMW X5?

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan in a BMW X5, remove the carpet located directly under the glove compartment on the passenger side, along with the corresponding panel. Once the panel is removed, unscrew the bolts securing the fan in its housing and disconnect the related connectors.

When the part is completely free, pull it out of its seat, connect the new fan to the connectors, and secure it with screws; finally, reattach the panel and carpet.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan on BMW X5
How to Remove the Cabin Fan on BMW X5
BMW X5 (1999-2006 / E53) Remove the damaged cabin fan? Let's see how to take out the fan from inside the BMW X5. Open the door and remove the plastic cover above the center d…
How to Repair the Cabin Fan on BMW X5
How to Repair the Cabin Fan on BMW X5
BMW X5 (1999-2006 / E53) Remove the damaged cabin fan from the BMW X5? Let's see how to take out the fan from inside the dashboard. Remove the plastic cover above the center …
Guide to Removing the Cabin Fan of the BMW X5
Guide to Removing the Cabin Fan of the BMW X5
BMW X5 (1999-2006 / E53) This guide will show you how to remove and replace the cabin fan of the BMW X5, following the instructions below. First, get inside the vehicle and s…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos