Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling Electric Water Pump

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

Installing electric coolant circulation pumps is a growing trend in the automotive industry: the goal is to eliminate more power take-offs from the engine to improve performance and fuel efficiency. This is a standard centrifugal pump, but instead of being driven by a belt through a pulley, it is powered by an electric motor.

Once you disconnect the inlet and outlet hoses, the power supply, and remove the mounting pins, you can place the pump on a workbench and proceed with disassembly. Remove the screws securing the rear cover, under which the electronic components are located; then separate the drive part of the pump from the pump itself, making sure to remove all screws first.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to replace the water pump of the BMW Series 3 320D
How to replace the water pump of the BMW Series 3 320D
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, we will see the main instructions on how to disassemble and replace the water pump of the BMW Series 3 320D. First, let's open the car…
Removing Radiator Mechanical Fan
Removing Radiator Mechanical Fan
BMW Serie 3 (1998-2006 / E46) To remove the radiator fan, you first need the proper tools: a 32mm wrench and a tool to lock the water pump pulley. It is also possible to rent thes…
Water Pump and Thermostat Replacement
Water Pump and Thermostat Replacement
BMW Serie 3 (1998-2006 / E46) Open the hood and ensure it is securely supported. The water pump is located at the front of the engine, so you need to remove the air intake duct, t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos