Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Stereo in a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In this video tutorial, you can see how to change the stereo in a BMW 1 Series. The video will show the removal of a business model radio and the installation of a "Pioneer" DHX 5700 BT stereo, which features a USB port on the front and an Aux input; at the back, there is a connector for the antenna and power cables, as well as an input for a microphone to use the Bluetooth device.

To remove the stereo, you will need a practical kit for removing and installing the interior plastic parts of the car, and the keys to remove the radio, which you can also find on Amazon. First, remove the plastic panels located above and below the stereo, taking care not to break the clips.

Now, remove the climate control panel by applying light pressure. Next, unscrew the stereo screws, disconnect the electrical cables, and install the new Pioneer stereo.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) If you own a BMW 1 Series e81 and want to find out where the car's OBD port is located, all you have to do is follow the procedure described in our n…
BMW Serie 1 (2011-2019 / F21, MK 2, F20) If you want to find out how you can replace the headlight bulb of your BMW 1 Series F20, just pay attention to the procedure described below. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos