Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Steering Angle Sensor on a BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

To reset the steering angle sensor on a BMW 3 Series, use a diagnostic tool: first, position the steering wheel so that the wheels are perfectly straight. Then, connect the scanner to the vehicle's OBD port, located under the steering column: select the car model and the corresponding version, following all the settings provided in the tutorial. Once the operation is complete, disconnect the tool, ensuring that the reset was successful.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Angle Sensor on a BMW 3 Series
How to Replace the Steering Angle Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure for removing and replacing the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and…
How do you replace the steering angle sensor of the BMW 3 Series?
How do you replace the steering angle sensor of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In order to replace the steering angle sensor of the BMW 3 Series, you need to release the pins located at the back of the steering wheel, so that th…
Replacing the Steering Angle Sensor on a BMW 3 Series
Replacing the Steering Angle Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and start by removing t…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos