Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the steering angle sensor in the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

In this tutorial, you will see how to reset the steering angle sensor in the BMW 3 Series, a very simple and quick operation. To do this, you will need the scanner shown in the video or an equivalent model, which can also be easily found online. Start by connecting the scanner to the vehicle's OBD port, then turn it on and set the key to the first position. Next, go to the "SAS" section, select the correct model from the list, and turn on the instrument cluster. At this point, select "Perform Steering Angle Sensor adjustment", follow the instructions on the screen, and once finished, restart the vehicle.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Angle Sensor on a BMW 3 Series
How to Replace the Steering Angle Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure for removing and replacing the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and…
How to Reset the Steering Angle Sensor on a BMW 3 Series?
How to Reset the Steering Angle Sensor on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To reset the steering angle sensor on a BMW 3 Series, use a diagnostic tool: first, position the steering wheel so that the wheels are perfectly stra…
Replacing the Steering Angle Sensor on a BMW 3 Series
Replacing the Steering Angle Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and start by removing t…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos