Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : How to reset the engine light on BMW 120D 1 Series

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 MK 2, F21, F20 - Years 2011-2019
Part: -board computer
Operation: How to reset the engine light on BMW 120D 1 Series

In this video we will show you how to reset the engine light on the BMW 120D Series 1. This operation must be carried out by keeping the instrument panel on. Take an OBD2 device and insert it into the socket located at the bottom left of the steering wheel, near the door (you can also use an extension lead). Open the application that you have previously downloaded on your mobile phone (tablet or PC) for engine diagnostics and connect it via bluetooth to your OBD2 device. Press on the item 'Error code' that you find in the application and wait for the system to synchronize. Once synchronized, press on the item 'Update' and when the error is displayed proceed to delete it by clicking on the 'delete error' button. Now start the engine and if the operation is successful the engine warning light will no longer appear.


Posted on 21 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 1 2011-2019 - How do you dismantle the cluster of the BMW Serie1 F20? Read Answer
    • Serie 1 2011-2019 - What to do when the service warning light comes on on the BMW 1 series? Read Answer
    • Serie 1 2011-2019 - Where can you find the explanations of the warning lights on the BMW 1 Series? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos