Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Core in a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Heater core

See other generations:
Video tutorial

To replace the heater core in a BMW 3 Series, you need to completely disassemble the dashboard: start by loosening the screws that secure the covers around the steering column, then remove the steering wheel and all the trim on the passenger side. Next, pry off the covers of the center tunnel and the center control panel: after removing all these components, you can loosen the support bolts of the heater core and disconnect the hoses.

This will allow you to install the new heater core and reassemble the dashboard.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Core in a BMW 3 Series
How to Replace the Heater Core in a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The procedure for replacing the heater core in a BMW 3 Series requires completely disassembling the dashboard: start by loosening the screws that sec…
How to Replace the Heater Core in a BMW 3 Series
How to Replace the Heater Core in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Discover the main steps to remove and replace the heater core in the BMW 3 Series cabin by following the instructions below. First, get inside the ve…
How to Remove the Heater Core from a BMW 3 Series
How to Remove the Heater Core from a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, let's go over the main instructions for removing and replacing the cabin heater core in a BMW 3 Series. First, get inside the vehicle and star…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos