Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery for a BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Key

Let's go through the main steps to disassemble and replace the battery in the remote key for a BMW 5 Series. First, take your key and use something thin and pointed to pry open the side of the key shell, allowing access to the remote; this gives you access to the circuit board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type; then close the two halves of the remote by reversing the procedure!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the BMW 5 Series G30
How to Replace the Key Battery of the BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) Replacing the button battery inside your BMW 5 Series G30 key is very simple, and with the instructions in this guide, you will complete the entire o…
How to replace the battery of the BMW 5 Series E60 key
How to replace the battery of the BMW 5 Series E60 key
BMW Serie 5 (2003-2010 / E61, E60) If you need to replace the battery in the key of your BMW 5 Series e60, simply read the following procedure carefully and follow all the steps. First…
How to Replace the Key Fob Battery for the BMW 5 Series?
How to Replace the Key Fob Battery for the BMW 5 Series?
BMW Serie 5 (2017-2024 / G30) Replacing the key fob battery for the BMW 5 Series is a very simple and quick operation. You need a replacement CR2032 3V battery and a small flathea…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos