Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote control shell of a BMW?

Model: BMW BMW Various
Part: Key

In this tutorial we can see how to replace the remote control shell of a BMW, a very simple and fast operation. To do this, in addition of course to the right spare part, we will need a small screwdriver with a flat tip or an equivalent tool. First of all, we extract the emergency key by pressing the appropriate button, after which we leverage along the lateral joint until the two halves are completely separated. Once this is done, we can remove both the old battery and the IC, place both in the replacement shell and put it all back together.

Posted on 7 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door stuck in a BMW?
How to open the fuel door stuck in a BMW?
BMW BMW Various In our BMW, it may happen that the fuel door gets stuck, for example due to a problem with the unlock button or the lock actuator. In these cases, it…
How to change the battery in a BMW key?
BMW BMW Various To change the battery of a BMW vehicle key it takes no more than a minute and all we need is an Italian-type screwdriver (ie the flat ones). First, w…
How do you reset error code CC id 63 in BMW cars?
How do you reset error code CC id 63 in BMW cars?
BMW BMW Various The specified code indicates the presence of a tire pressure anomaly in BMW cars. It is a direct consequence of a simple deflated tire, punctured tir…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos