Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuse Boxes and Understand Their Schematics on BMW 3 Series E46 - 1998-2006

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

The video shows the fuse schematic for the BMW 3 Series (E46), produced from 1998 to 2006. The fuse box is located in the glove compartment on the passenger side, as seen in one of the first images. The schematic illustrates not only the layout but also the functionality of the components; it includes fuses for the mirror lights, radio control unit, antenna amplifier, the onboard monitor control unit, and the related interface; it also includes the instrument cluster control unit, the multi restraint system II: sensor for the right and left airbag, Hall sensor, seatbelt buckle for the driver and passenger; rain sensor, wiper/wash control unit, reverse light relay, heating and air conditioning control module, fog light relay, etc. The second fuse box, as shown in the second image, is located in the engine compartment; again, the following schematic shows the different functionalities.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) .. boxes of a BMW 3 Series, model E46, produced from 1998 to 2006. The first box shown is the one inside the vehicle's cabin, located behind the glove compartment.. …
BMW Serie 3 (1998-2006 / E46) This brief guide shows the location of the fuse boxes on the BMW 3 Series E46, following the instructions below. First, open the hood of your car and…
BMW Serie 3 (1998-2006 / E46) If you want to find out where the fuse box of your BMW 3 Series E46 is located, then all you have to do is read the following guide and follow all th…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos