Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver's seat in BMW 6 Series?

Model: BMW Serie 6 F13, F06, F12 - Years 2011-2018
Part: Seat

In the first part of this video we can see how to remove the driver's seat in a BMW 6 Series. The vehicle's control units are located under this seat, therefore, before starting, it is good practice to disconnect the battery to prevent it from car ignition errors occur. Once this is done, move the seat backwards and unscrew the two bolts located at the base in the front part, then move the seat all the way forward and do the same thing with the bolts behind. Once removed we can fold the seat backwards and disconnect the electrical connectors of the control units under the seat which is now free and can be extracted from the car.

Posted on 6 January 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located for the BMW 6 Series E63?
Where is the fuse box located for the BMW 6 Series E63?
BMW Serie 6 (2003-2011 / E64, E63) In this new guide dedicated to your BMW Series 6 e63 (year 2003-2011), we will discover where the fuse box is located. This way, you will have the po…
What is the fuse diagram for the BMW 6 Series?
What is the fuse diagram for the BMW 6 Series?
BMW Serie 6 (2003-2011 / E64, E63) In this video we can see where the fuse boxes of the BMW 6 Series are located and what the respective diagrams are, useful in case we need to check t…
How to remove the external door handle of a BMW 6 Series
How to remove the external door handle of a BMW 6 Series
BMW Serie 6 (2003-2011 / E64, E63) Before we can begin, we will have to go and open the door of our BMW 6 Series. Let's start by pulling and holding the external door handle. In the me…

Other guides you may be interested in

How to Disassemble and Remove the Rear Camera of a Mercedes CLA

In this video, see how to disassemble and remove the camera (where the license plate light is located) from the rear hatch of a Mercedes CLA. First, open the rear hatch of the car, then remove the rear license plate. Use a screwdriver to remove the screws on the plastic trim of the hatch. Disconnect the plastic trim of the license plate light from the hatch, and use a screwdriver to remove the retaining clips (located between the hatch metal and the plastic trim). Finally, remove the rear camera located in the hatch (disconnect the power connector of the camera) of the car. For reassembly, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos