Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windshield Washer Pump Repair Near Me

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

If you need to repair or replace the windshield washer pump on this vehicle, refer to the instructions below and the video. The first step is to remove the right front wheel and take out all the screws securing the inner fender.

Next to the fender, you will find the windshield washer fluid reservoir that needs to be removed. Underneath it, you will find the two pumps for the front and rear washer systems.

You can then proceed to disconnect the inlet and outlet hoses and either repair or replace the pump.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Replacing the windshield wiper motor on the BMW 3 Series
Replacing the windshield wiper motor on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide provides instructions for removing and replacing the windshield wiper motor on the BMW 3 Series. First, open the hood of the vehicle and s…
Location of the Fuse Boxes on a BMW 3 Series E46
Location of the Fuse Boxes on a BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see where the fuse boxes are located on the BMW E46 (produced from 1998 to 2006): The first fuse box is in the glove compartm…
Removing Fuel Pump BMW 3 Series
Removing Fuel Pump BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, in this video tutorial, you will learn how to remove the fuel pump from a BMW 3 Series. First, open the trunk and remove the covering on the r…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos