Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Transmission on the BMW X5

Model: BMW X5 E53 - Years 1999-2006
Part: Warning light – error code

If you are experiencing issues with the automatic transmission of your vehicle, you can reset the transmission by following the simple instructions in this description and referring to the video. First, access the cabin and sit in the driver's seat; with the ignition off, press the accelerator pedal all the way down and hold it for at least 30 seconds. This will allow the vehicle to reset the transmission and clear any errors. Afterward, start the vehicle to check for proper operation.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Automatic Transmission in a BMW X5?
How to Unlock the Automatic Transmission in a BMW X5?
BMW X5 (2013-2018 / F15) In this tutorial, you will see how to unlock the automatic transmission in a BMW X5. This is a simple operation to perform in order to shift into neu…
How to reset the automatic transmission of the BMW X5 e53?
How to reset the automatic transmission of the BMW X5 e53?
BMW X5 (1999-2006 / E53) When we notice a difficulty in the gear sequence with the automatic transmission of the car, we can try to reset it through a specific procedure. Fir…
How to Replace the Automatic Shift Lever on the BMW X5 E70
How to Replace the Automatic Shift Lever on the BMW X5 E70
BMW X5 (2007-2013 / E70) This guide shows how to replace the automatic shift lever on the BMW X5 E70. The first step is to remove the trim plate around the shifter using a pl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos