Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on a BMW 5 Series?

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Fog lights

To replace the fog light on a BMW 5 Series, disconnect the clips securing the plastic grille next to the corresponding fog light. Once these clips are removed, you can detach the grille and locate the screws securing the light on the side. After loosening these screws, you can pull the light out from its housing, disconnecting the connector at the back. At this point, connect the new replacement part, securing it with the appropriate screws and reinstalling the grille.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the BMW 5 Series?
Where are the fuses located in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) The fuse boxes of the BMW 5 Series are responsible for containing all the fuses that regulate the operation of the devices installed in the car: the …
Where are the fuses located in the BMW 5 Series?
Where are the fuses located in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In the BMW 5 Series, the fuses are contained within the designated fuse boxes installed in the vehicle: the first is located inside the cabin, behind…
Where are the fuses located in the BMW 5 Series?
Where are the fuses located in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) All the fuse boxes of the BMW 5 Series are responsible for containing all the fuses that regulate the operation of the devices installed on the vehic…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos