Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Interior Door Handle on BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Car door

Here’s how to proceed if the trim on the interior door handle of the BMW 5 Series is damaged and needs replacement. Using a plastic lever, remove the upper shiny trim of the panel and the frame of the opening lever. This gives access to two screws; once unscrewed, you can remove the door panel, disconnect all wiring, and unscrew the four screws that secure the handle. The window switch will come off with the handle, which you will remove to reuse with the new handle, putting everything back in place and securing it with its screws. Reconnect the various wiring, secure the panel in place, screw in the two screws, and replace the handle frame and shiny trim in their positions.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2010-2017 / F11, F10) To replace the interior handle on a BMW 5 Series, you need to completely remove the corresponding door panel: to do this, you must detach the cover l…
BMW Serie 5 (2010-2017 / F11, F10) These short and simple steps will show us how to disassemble and replace the outer handle of the front door of the BMW 5 Series. First, we open the f…
BMW Serie 5 (2010-2017 / F11, F10) To remove the door panel of the BMW 5 Series, use a tool to pry off the trim located at the top of the panel. Once this trim is removed, you can unsc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos