Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : How to replace the low beam bulbs in the BMW 5 Series?

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight bulb
Operation: How to replace the low beam bulbs in the BMW 5 Series?

In this tutorial, we can see how to replace the low beam bulbs in the BMW 5 Series, a very simple operation. Before proceeding, make sure the key is not inserted to operate safely. Let's start by turning the wheels inward towards the side where we will be working, then locate the small door in front of the wheel and open it. Next, unscrew the large circular cap, grip the bulb by the connector, and extract it by rotating it slightly counterclockwise. Finally, install the replacement bulb, being careful not to touch the glass directly with bare hands.


Posted on 4 July 2023 by ScegliAuto



How to replace the headlight bulb of a BMW 5 Series.
BMW Serie 5 (2003-2010 / E61, E60) Let's briefly go over the step-by-step instructions that will allow us to disassemble and replace the headlight bulb of the BMW 5 Series. First, we o
Replacing the front H7 bulbs on BMW 5 Series e60
BMW Serie 5 (2003-2010 / E61, E60) When working with the engine off and the handbrake applied, raise the hood and secure it. Now you can, as shown in the video, remove the rear cover o
BMW 5 Series Headlight Bulb Replacement
BMW Serie 5 (2010-2017 / F11, F10) Today we see in this guide the instructions on how to remove and replace the low beam headlight bulb of the BMW 5 Series. First we open the engine ho

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos