Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Shift Knob

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Shift knob

Replacing the shift knob in your car is not a complex task and can be done independently. The following guide shows you how to do it. You just need a screwdriver and some lubricant grease. The new knob should be pushed onto the shaft and firmly locked in place, and if necessary, tighten the mounting screws and the clip to secure the boot, which usually comes with the new package. Perform these steps calmly and patiently, without forcing anything excessively. After removing the old knob, apply some grease to the shift lever.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob and gear shift boot of the BMW 3 Series
How to replace the gear knob and gear shift boot of the BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below are the necessary instructions to disassemble and replace the gear knob and gaiter of the BMW 3 Series, in simple and quick steps. First, get i…
How to replace the gear knob on a BMW 3 Series
How to replace the gear knob on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before we can begin, we will have to go and sit in the driver's seat of our BMW 3 Series. Let's start by grabbing the gear knob with both hands. At t…
How to replace the gear shift knob cover of the BMW 3 Series.
How to replace the gear shift knob cover of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) Today with the help of this video tutorial, we will explain how to replace the shift knob and gear shift boot of a BMW 3 Series. This type of operati…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos