Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the BMW 3 Series F31

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Service warning light

By following the steps outlined in this guide, you will successfully complete the manual reset of the oil light on your 2012-2019 BMW 3 Series F31. First, get in the vehicle and turn on the instrument cluster. Then, press and hold the button located in the lower left corner of the dashboard and release it as soon as the display shows the oil life message. At this point, press and hold the same button again and wait for the reset to complete. Finally, turn off the instrument cluster, and you are finished.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a BMW 3 Series F31
How to Reset the Service Light on a BMW 3 Series F31
BMW Serie 3 (2012-2019 / F30, F31) If you have just performed the regular service on your BMW 3 Series F31 (2012-2019), but the warning light continues to illuminate on the instrument …
How to Replace the Horn on BMW 3 Series F31
How to Replace the Horn on BMW 3 Series F31
BMW Serie 3 (2012-2019 / F30, F31) Here are the instructions to remove and replace, in simple steps, the horn or sound signal on a BMW 3 Series F31. First, lift the vehicle from the fr…
Replacing Headlight Bulb on BMW 3 Series F30 - F31
Replacing Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will learn how to remove and replace the low beam and high beam bulbs in the front headlight of a BMW 3 Series F30 and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos