Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service of the BMW 3 Series versions F30/F31

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Warning light – error code

In this video we see how to reset the service of the BMW 3 Series in the F30/F31 versions: with all the car doors closed, turn on the instrument panel without starting the engine. If we have an automatic transmission, keep your foot off the pedal and press the Start & Stop button. We see that the display shows "engine oil". Below the fuel level gauge we find a small button, hidden in a corner. We will press it for a few moments and see that the display will show "reset possible". Continue to hold it down, and it says "perform reset?" release it and then hold it down again. Now the display says "reset in progress". Release it as soon as it says "reset successful". Now go to the oil level and repeat the entire procedure.

Posted on 1 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) Let's see how to reset the service light on a BMW 3 Series F30/F31: turn on the ignition, and press the BC button on the steering column, which is us…
BMW Serie 3 (2012-2019 / F30, F31) In today's video, you will see how to remove and replace the front headlight bulb on a BMW 3 Series F30 and F31. First, open the hood and remove the …
BMW Serie 3 (2012-2019 / F30, F31) The service light is a reminder to notify you of the need to perform maintenance on your car, in this case, a BMW 3 Series F30. Fortunately, you can …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos