Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Wheel Bearing

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Bearing

See other generations:
Video tutorial

Even when the issue with your car refers to just one bearing, it's always advisable to replace both. If you find yourself in an emergency situation and cannot replace both, the following guide shows you how to do it yourself.

First, remove the wheel and extract the bearing by striking the opposite side with a hammer at multiple points around the rim for a more even release. Before inserting the new bearing, clean and grease the seat where it will be positioned.

Then, position the new bearing by gently but firmly tapping it into place with the hammer.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing the Center Bearing, Also Known as Flex Disc
Replacing the Center Bearing, Also Known as Flex Disc
BMW Serie 3 (1998-2006 / E46) If the center support bearing of your car's driveshaft is worn, also known as the Flex Disc, you may experience transmission issues or noises during …
Transmission Support Bearing Replacement
Transmission Support Bearing Replacement
BMW Serie 3 (1998-2006 / E46) In rear-wheel drive vehicles, like almost all BMWs, there is a driveshaft that connects the transmission to the rear differential and features a cent…
Rear Wheel Bearing Replacement
Rear Wheel Bearing Replacement
BMW Serie 3 (1998-2006 / E46) Obtain replacement bearings. A faulty bearing can also compromise the axle, so replace it immediately. Lift the vehicle, secure it, and remove the wh…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos