Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the BMW X5?

Model: BMW X5 F15 - Years 2013-2018
Part: Fuse box

The fuses of the BMW X5 are contained within the fuse boxes installed in the car: in this model, it is possible to identify two boxes. The first one is located immediately behind the glove compartment on the passenger side: here you can find the fuses responsible for the operation of the power windows, air conditioning, low beam headlights, etc. The second fuse box is instead located on the right side of the trunk compartment: in this box, you can find the fuses for the radio, cabin fan, etc.

Posted on 14 August 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses on the BMW X5 located?
Where are the fuses on the BMW X5 located?
BMW X5 (2007-2013 / E70) The fuses of the BMW X5 are divided into the special fuse boxes located inside the car: in this vehicle model two boxes can be identified. The first …
Where are the fuses located in the BMW X5?
Where are the fuses located in the BMW X5?
BMW X5 (2013-2018 / F15) On board the BMW X5, it will be possible to notice that the fuses are located inside the appropriate fuse boxes that are installed on the vehicle: in…
Where are the fuses located in the BMW X5?
Where are the fuses located in the BMW X5?
BMW X5 (2007-2013 / E70) Each fuse of the BMW X5 is located inside one of the specific fuse boxes that are placed inside the vehicle: in this type of vehicle, two boxes can b…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos