Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the dashboard of the BMW 3 Series.

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Dashboard
Operation: How to remove the dashboard of the BMW 3 Series.

Today we will see, in this short and simple guide, the steps that will allow us to dismantle the dashboard of the BMW 3 Series. First of all, we get into the car and start dismantling and removing the glove compartment, opening it and unscrewing all the fixing screws; we remove the central cover of the dashboard, unscrewing the screws that we find underneath, as shown in the video. At this point, we proceed to remove the steering wheel and all the central instrumentation, including the car radio and the air conditioning controls, disconnecting all the electrical wiring; we then remove the entire dashboard, following the video tutorial until the end!


Posted on 13 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - How to remove the central dashboard panel of the BMW 3 Series 320d e90? Read Answer
    • Serie 3 1998-2006 - What is the meaning of the warning lights in the dashboard of the BMW e46? Read Answer
    • Serie 3 1998-2006 - How do you remove the central dashboard panel of the BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - What warning lights can be found on the BMW e90? Read Answer
    • Serie 3 2005-2013 - Meaning of the warning lights in the dashboard of the BMW 318? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos