Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the BMW 3 Series air conditioning fan.

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Blower motor

In this video tutorial, we will see how to disassemble and replace the air conditioning fan of the BMW 3 Series. First, we open the car's engine hood and start unscrewing the plastic cover fastening screws located on the top of the dashboard, in order to remove it. We will find the air conditioning fan at the back, as shown in the video. At this point, we unscrew the fan fastening screws, disconnect the electrical connector to remove it, and replace it with the new one. We then apply the reverse process for reassembly, and test its functionality afterwards!

Posted on 18 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement fan of the klima on BMW 3
Replacement fan of the klima on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Replacing the climate fan on a BMW 3 Series? We open the front hood and begin to remove the plastic protection under the windshield. Using a screwdri…
Fan resistor replacement on Series 3
Fan resistor replacement on Series 3
BMW Serie 3 (1998-2006 / E46) Do we want to remove the fan resistor on a BMW 3 Series? Let's see the disassembly of the pieces placed inside the front dashboard. We open the door …
How to replace the cabin fan resistor of the BMW 3 Series.
How to replace the cabin fan resistor of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, we will see how to disassemble and replace the cabin fan resistor of the BMW 3 Series. First, we get into the car on the pass…

Other guides you may be interested in

How to Reset the Tyre Pressure Indicator on a Jeep Wrangler

This procedure does not require any special tools or skills. After starting your vehicle and noticing the indicator on the dashboard display, simply open the driver's side door to get the correct pressure settings for both front and rear tyres. Inflate your tyres to the indicated pressures, then restart the vehicle's onboard computer. If the indicator continues to flash, contact a specialist to check the relevant sensor.

Watch the video!


by ScegliAuto

More videos