Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the front headlights on the BMW 3 Series?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Headlight
Operation: How to remove the front headlights on the BMW 3 Series?

In this tutorial we can see how to remove the front headlights in the BMW 3 Series E90, an extremely simple operation but that requires removing the bumper. First of all, we open the engine hood, then we unscrew the bolts located on the upper edge of the grille with a Torx T25 key. We then move in front of the wheel arches, remove the bolts located inside them and continue with those located on the lower edge of the bumper. At this point, we can detach the bumper from the frame, unscrew the fixing screws of the headlights and disconnect the power connectors.


Posted on 9 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the type of position light bulb on the BMW 3 Series E90? Read Answer
    • Serie 3 2012-2019 - Is it possible to remove the lens of the headlight of the BMW 3 series F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos