Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Cabin air filter replacement

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Cabin air filter
Operation: Cabin air filter replacement

This car model actually has two cabin air filters, one on the driver's side and the other on the passenger side, both located in the engine compartment, just below the windscreen; to replace, therefore, open the front hood and intercept the filter seat, unhook the metal bar that acts as a stop for the cover to be able to remove it and then extract the filter from its seat, make sure there are no residues of dirt and insert the new one (we recommend that with activated carbon) orienting it according to the direction of the air flow and then reposition the lid.


Posted on 10 September 2023 by ScegliAuto



Cabin air filter replacement
BMW Serie 5 (2003-2010 / E61, E60) The cabin air filters are actually two and are located in the engine compartment, just below the windshield. Therefore, open the front hood and make
Replacement cabin air filter BMW 5 Series 520d
BMW Serie 5 (2010-2017 / F11, F10) In this video tutorial we will see how to remove and replace the cabin air filter of a BMW 5 Series 520d. First we get inside the car and remove the
Disassembly and replacement of cabin air filter
BMW Serie 5 (1988-1995 / E34) On the BMW 5 Series E34, the cabin air filter is located behind the center tunnel. To be able to replace it, it is necessary to remove the side panel

Other guides that may interest you

    Frequently Asked Questions

    • Serie 5 2017-2024 - Where is the Pollen Filter of a BMW 5 Series located? Read Answer
    • Serie 5 2010-2017 - Where is the pollen filter of the BMW 5 Series F10 located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos