Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Cabin air filter

See other generations:
Video tutorial

Obtain a cabin air filter that is identical to the original model. The cabin air filter purifies the air inside the vehicle and is located in the engine compartment under the windshield.

To access it, rotate the two side clips and remove the screws from the air grille and the protective cover, freeing it from the rubber gasket. Move the cover by lifting it. Once the filter cover is removed, carefully pull the cartridge out of its housing to avoid dust dispersal.

Place the new filter in the housing after thoroughly cleaning the housing and ensuring proper orientation, then securely close the cover.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of Cabin Air Filter
Removal and Replacement of Cabin Air Filter
BMW Serie 5 (1995-2003 / E39) Open the hood and locate the two compartments where the cabin air filters are positioned. One is on the left and one on the right, both near the wind…
Cabin Dust Filter Replacement
Cabin Dust Filter Replacement
BMW Serie 5 (2003-2010 / E60, E61) Obtain a dust filter of the same model identical to the original. The dust filter purifies the air in the cabin and is located in the engine compartm…
How to Replace the Cabin Air Filter on BMW 5 Series E60
How to Replace the Cabin Air Filter on BMW 5 Series E60
BMW Serie 5 (2003-2010 / E60, E61) In this video tutorial, you will see how to replace the cabin air filter on a BMW 5 Series E60 by following a few simple steps: the first thing to do…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos