Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW 3 Series?

Model: BMW Serie 3 G20 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a BMW 3 Series, turn on the ignition using the appropriate button. Then, press and hold the button at the end of the lever on the left side of the steering wheel.

This will open a menu, and you need to scroll through it by continuing to press the same button until you find the maintenance option. At this point, press and hold the button again until the light resets and the maintenance interval is cleared.

Once the operation is complete, you can turn off the ignition.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Service Light on BMW 1 Series E87 - 3 Series E90
How to Reset the Oil Change Service Light on BMW 1 Series E87 - 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Discover how to reset the oil change service light on the BMW 3 Series E90 and 1 Series E87 by following the instructions below. First, get in the ve…
How to reset the service light on the BMW 3 Series
How to reset the service light on the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today we will explain how to reset the service light, related to the maintenance on a 2017 BMW 3 Series vehicle in less than two minutes. To reset th…
How to Reset the Service Light on a 2003 BMW 3 Series
How to Reset the Service Light on a 2003 BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The service light on the BMW 3 Series activates when it's time for a maintenance service. After completing the maintenance, you can proceed to reset …

    Frequently Asked Questions

    • Serie 3 2012-2019 - What do the red and yellow oil warning lights mean in the BMW 3 series? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos