Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a BMW X3?

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

First, lift the vehicle using a lift. Open the hood and remove the plastic cover from the engine head.

Position a drain pan underneath. Locate the bolt securing the oil filter, remove it, and take out the filter, placing it in the drain pan. Raise the vehicle with the lift.

Find the engine drain hole to let the oil flow out. Place a drain pan underneath, unscrew the bolt, and allow the oil to drain. Close the drain hole.

Lower the vehicle using the lift. Replace the oil filter gasket, insert the new filter in place, and tighten the filter housing to secure it. Open the engine oil filler cap. Pour in oil until the reservoir is full to the maximum level.

Check with the dipstick. Reinstall the engine cover and close the hood.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil in a BMW X3?
How to Change Engine Oil in a BMW X3?
BMW X3 (2003-2010 / E83, MK 1) In this tutorial, you will see how to change the engine oil and filter in a BMW X3, a very simple and quick operation. First, wait until the engine i…
How do you replace the motor oil of the BMW X3?
How do you replace the motor oil of the BMW X3?
BMW X3 (2003-2010 / E83, MK 1) To replace the motor oil of the BMW X3, you need to loosen the drain plug of the oil pan, which is located at the bottom of the vehicle: once the oil…
How to Change the Engine Oil in a BMW X3?
How to Change the Engine Oil in a BMW X3?
BMW X3 (2017-2024 / MK 3, G01) .. In this tutorial, you will see how to change the engine oil in a BMW X3, a very simple and quick operation. First, wait until the engine.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos