Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil indicator on the 2017 BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Service warning light

In the following guide, we will discover how you can manually and correctly reset the engine oil light that continues to illuminate on the vehicle's instrument panel. First of all, insert the key and start the engine, then locate the button located in the lower left corner of the dashboard, below the fuel gauge, and hold it down for a few seconds. As soon as the oil light appears on the display, release the button and hold it down again until the reset of the light is complete. Finally, turn off the engine.

Posted on 2 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the BMW X3 F25
How to reset the oil light on the BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) In order to successfully complete the manual reset of the engine oil light on the instrument panel of your BMW X3 f25 (2014), you just need to follow…
How to reset the Airbag light on the BMW X3
How to reset the Airbag light on the BMW X3
BMW X3 (2010-2017 / MK 2, F25) The airbag warning light reset on the BMW X3 is an operation that can be done independently with a little patience. Before starting the reset of the …
How to reset the service light on the BMW X3
How to reset the service light on the BMW X3
BMW X3 (2017-2024 / MK 3, G01) Today we will explain how to reset the paint warning light on a BMW X3 vehicle. To reset the warning light, we need to turn on and off the instrument…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos