Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windshield Washer Fluid Reservoir from a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
This video is currently unavailable

Disconnect and lift the hood, then locate the opening of the washer fluid reservoir. To proceed with the removal, have the tools shown in the video ready.

Now remove the rivets securing the edge of the bumper to the area where the side mirror is located. Next, remove the bolts securing the upper inner cover of the fender; there is also a bolt at the lower edge of your vehicle.

This will allow you to extract the relevant parts to access the back of the fender where the reservoir to be replaced is located. Now remove the water circulation hoses, and by removing the bolts that hold it, you can then remove it completely.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to replace the windshield washer fluid reservoir of the BMW 3 Series.
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
BMW Serie 3 (1998-2006 / E46) Today we will see the information that will allow us to disassemble the windshield washer fluid reservoir of the BMW 3 Series, in simple steps. First…
How to Replace the Windshield Washer Fluid Reservoir on a BMW 3 Series?
How to Replace the Windshield Washer Fluid Reservoir on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the windshield washer fluid reservoir on a BMW 3 Series, open the hood and locate the reservoir on the left side of the engine compartment…
Replacement of the windshield washer pump of the BMW 3 Series
Replacement of the windshield washer pump of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple steps will show us how to dismantle and replace the windshield washer pump of the BMW 3 Series. First, lift the vehicle and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos