Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to manually open the tailgate in the BMW X3?

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Checks and maintenance

In this tutorial we can see how to manually open the tailgate in the BMW X3, an extremely simple and quick operation to be carried out for example in case of a lock failure or a flat battery. First of all, we open the right rear door, then we actuate the indicated lever and lower the backrest completely. We then go inside the trunk, remove the battery protection panel and locate the lock, which must be operated using a screwdriver or equivalent tool. The tailgate will now be free to be opened and repaired.

Posted on 25 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Open a Stuck Trunk Lid on a BMW X3
How to Manually Open a Stuck Trunk Lid on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) This guide provides instructions to manually open the rear trunk lid of a BMW X3 by following these simple steps. First, open the rear door and recli…
How to Open the Stuck Trunk Lid of the BMW X3
How to Open the Stuck Trunk Lid of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) In this brief guide, you will find instructions to open the stuck rear trunk lid, for example, in case of a dead battery, on the BMW X3. First, open …
How to manually open the trunk lid of the BMW X3
How to manually open the trunk lid of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Today we will see the instructions that will allow us to manually open the rear tailgate of the BMW X3 trunk, in case the lock is stuck. First, we lo…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos