Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : How to remove the steering wheel on BMW 1 Series

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 MK 1, E87, E81, E82 - Years 2004-2013
Part: Steering wheel
Operation: How to remove the steering wheel on BMW 1 Series

To remove the steering wheel on your BMW 1 Series, you can follow the detailed instructions below. Always remember to disconnect the battery before starting, for safety reasons. Use a small flathead screwdriver and insert it into the two holes on the sides of the steering wheel. Pry to remove the airbag and disconnect the connector. Now you can disconnect the cables inside the steering wheel and unscrew the bolts to completely remove the airbag. Once the airbag is removed, unscrew the screws holding the steering wheel in place. Remove the steering wheel from its position. If you only need to replace certain parts of the steering wheel, you can proceed with removing the parts involved, otherwise, if you are installing a new steering wheel, follow the reverse procedure for installation. If you want to customize the steering wheel, you can apply 3D carbon vinyl on the steering wheel frame to cover any defects or damage on the surface.


Posted on 3 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 1 2011-2019 - What to do when the horn of the BMW 1 Series does not work? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos