Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the 4x4 Warning Light on the BMW X3

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

See other generations:
Video tutorial

First, turn off your vehicle. Then, press and hold the button located at the bottom center of the dashboard on the driver's side.

At this moment, turn the key to the "I" position. Keep the button pressed until you see the message "OIL SERVICE" or "INSPECTION", followed by "RESET" or "R". At this point, you can release the button.

Press the button again until the message "reset" or "r" starts flashing. While it is flashing, press the button again to reset everything.

Press the button again for 5 seconds until the message "END SIA" appears.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Reset the ABS and 4x4 Warning Lights on the BMW X3?
How to Reset the ABS and 4x4 Warning Lights on the BMW X3?
BMW X3 (2003-2010 / E83, MK 1) The illumination of the ABS light, along with the 4x4 light on the dashboard of the BMW X3, is a common issue, and the cause is almost always the sam…
How to Reset the 4x4 Warning Light on BMW X3
How to Reset the 4x4 Warning Light on BMW X3
BMW X3 (2003-2010 / E83, MK 1) If the warning light for the traction control system and the 4x4 remains on the instrument cluster display, and especially if you feel jerking during…
How to reset the 4x4 and brake lights on the BMW X3
How to reset the 4x4 and brake lights on the BMW X3
BMW X3 (2003-2010 / E83, MK 1) Due to an issue related to the control unit, it may happen that when starting the 2007 BMW X3, the 4x4 light and the handbrake light appear on the in…

    Frequently Asked Questions

    • X3 2010-2017 - Why does the 4x4 warning light come on on the BMW X3? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos