Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Parking Brake Button on BMW X5

Model: BMW X5 F15 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this useful video tutorial, you can see how to replace the parking brake button on a BMW X5, third generation model produced from 2013 to 2018. Let's start this simple operation by removing the old parking brake button from its housing. To do this, take a small flathead screwdriver and pry on the inner sides of the button as shown in the video to pop it out of its housing.

Once the old parking brake button is removed, you can insert a new one by simply placing it as shown in the tutorial.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

BMW X5 (2007-2013 / E70) To replace the handbrake button on a BMW X5, use a tool to pry off the trim that surrounds the center console. Once removed, proceed to loosen the sc…
BMW X5 (2007-2013 / E70) To reset the parking brake on a BMW X5, connect a diagnostic tool to the vehicle's OBD port: on this model, the port is located on the lower left sid…
BMW X5 (2007-2013 / E70) To replace the handbrake actuator on the BMW X5, open the rear hatch and then detach the panel on the left side of the trunk: once this panel is remo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos