Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulbs of the BMW 3 Series.

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Headlight bulb

In this short guide, we will see step-by-step instructions that will allow us to disassemble and replace the bulbs of the front headlight of the BMW 3 Series. First, let's move to the side of the wheel and start removing the plastic cover located on the front fender; then remove the plastic cap protecting the bulbs, disconnecting the electrical connector and unhooking the metal clip to remove the light from the optical group, as shown in the video. At this point, install the new bulb, of the correct type and with the same attachment, reassembling everything!

Posted on 12 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of front bulbs
Replacement of front bulbs
BMW Serie 3 (2005-2013 / E92, E90, E91) Ko headlight bulbs? We see the disassembly of the bulbs in the headlight of a BMW 3 Series. We lift the front hood, we find the inspection cap of the…
Replacing the headlight bulbs of a BMW 3 Series
Replacing the headlight bulbs of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see the replacement of the headlight bulbs on BMW 3 Series. We open the front hood by pulling the lever located at the bottom right of the dash…
Headlight lights replacement on BMW 3
Headlight lights replacement on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Are the BMW 3 Series headlight bulbs burned out? Let's see how they disassemble. We open the front hood by pulling the lever at the bottom of the das…

Other guides you may be interested in

How to Remove the Window Regulator Motor from a Volkswagen Touareg

Learn how to remove the door motor from a Volkswagen Touareg. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover, then unscrew the screws inside with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the door panel by hand, then use a screwdriver or power screwdriver to unscrew the fastening screws of the door actuator motor. Disconnect the various power terminals and replace it with a new one. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos