Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you check the oil level of the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Engine oil

In order to check the oil level of the BMW 3 Series engine, you need to open the hood so that you can access the internal components of the engine compartment: here you will be able to locate the dipstick for checking the oil level. At this point, you can extract the dipstick and clean it with a cloth: then you will need to reinsert it and immediately extract it again. In this way, you will be able to see the mark left by the oil present in the system: make sure that this is between the minimum and maximum levels indicated on the dipstick, topping up if necessary.

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Engine Oil Level of the BMW 3 Series
How to Check the Engine Oil Level of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, in this brief and simple guide, you will learn how to check the engine oil level of the BMW 3 Series by following the instructions below. Firs…
How to Check Your Car's Engine Oil Level
How to Check Your Car's Engine Oil Level
BMW Serie 3 (2005-2013 / E91, E90, E92) To check the oil level, first ensure the transmission is in park mode and the parking brake is engaged. Then access the menu on the display located o…
How to add motor oil to the BMW 3 Series
How to add motor oil to the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today's procedure will show us how to add and top up the new motor oil on the BMW 3 Series. First, we open the car's hood and start unscrewing the mo…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos