Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2020 BMW X3

Model: BMW X3 G01, MK 3 - Years 2017-2024
Part: Service warning light

When the engine oil warning light on the instrument panel of your 2020 BMW X3 continues to turn on by mistake, you must proceed with a manual reset of the light in question. Below we will discover together how to perform this operation quickly and correctly. First of all, reach the driver's side and start the engine, then press the button located in the lower left corner of the dashboard several times until you see the total kilometers traveled on the display of the instrument panel. At this point, hold down the same button and release it after a couple of seconds. Finally, hold it down one last time until the reset is complete.

Posted on 25 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the BMW X3 2023
How to reset the oil light on the BMW X3 2023
BMW X3 (2017-2024 / G01, MK 3) If the oil warning light on the instrument panel of your BMW X3 (2023) continues to appear even after you have changed the oil and filter, then the o…
How to reset the oil indicator on the 2017 BMW X3
How to reset the oil indicator on the 2017 BMW X3
BMW X3 (2010-2017 / F25, MK 2) In the following guide, we will discover how you can manually and correctly reset the engine oil light that continues to illuminate on the vehicle's …
How to reset the oil warning light on BMW X3 2021
How to reset the oil warning light on BMW X3 2021
BMW X3 (2017-2024 / G01, MK 3) If you want to manually reset the engine oil warning light that appears on the instrument panel of your BMW X3 third series (year 2021), just put int…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos